Konica Minolta BIZHUB C250 User Manual page 444

Replacing toner cartridges and staples and emptying waste containers
4
Swing open the shutter
of the staple cartridge
holder, and then pull out
one sheet of staples.
5
Return the shutter of the staple cartridge holder to its original position.
6
Insert the staple car-
tridge holder until it locks
into place.
7
Slide the finisher back against the machine.
Reminder
If stapling still cannot be resumed, even after performing the above pro-
cedure, contact your technical representative.
C250
Sheet of
staples
Shutter
9
9-21