Konica Minolta BIZHUB C250 User Manual page 515

12
Parameter
Printer Ad-
justment
Finisher
Adjust-
ment
Density
Adjust-
ment
12-28
Description
Leading Adjust the starting print position be-
Edge tween –3.0 and 3.0 mm at the leading
Adjust- edge of the paper (with respect to the
ment paper feed direction). Adjustments can
be specified for each paper type.
Centering Adjust the starting print position be-
tween –3.0 mm and 3.0 mm at the left
edge of the paper (with respect to the
paper feed direction). Adjustments can
be specified for each paper tray.
Centering Adjust the starting print position be-
(Duplex tween –3.0 mm and 3.0 mm at the left
2nd Side) edge of the paper for the second side
during automatic double-sided copying.
Adjustments can be specified for each
paper tray.
Media Ad- If the print image is flawed (missing print,
justment white spots, or uneven printing) due to
the characteristics of the type of paper
that is used, adjust this parameter be-
tween –5 and +5 according to the paper
type.
Erase The width of the area erased from the
Leading leading edge (margin) can be adjusted to
Edge 4 mm, 5 mm, or 7 mm. For details on
making this adjustment, contact your
technical representative.
Center Adjust the center stapling position be-
Staple tween –7 mm and 7 mm for printing with
Position the "Fold & Staple" setting.
Half-Fold Adjust the center folding position be-
Position tween –7 mm and 7 mm for printing with
the "Half Fold" setting.
Thick Pa- Adjust the image density for printing on
per Image thick paper, overhead projector trans-
Density– parencies, or envelopes. The density can
Yellow be adjusted separately for each color
(yellow, magenta, cyan and black for a
Thick Pa-
color image and the black image densi-
per Image
ty). The higher the setting, the darker the
Density–
density.
Magenta
Adjust the setting for yellow, magenta,
cyan and black between –5 and +5.
Thick Pa-
Adjust the setting for "Black Image Den-
per Image
sity" between –2 and +2.
Density–
Cyan
Thick Pa-
per Image
Density–
Black
Black Im-
age Densi-
ty
Utility
Default Setting
0.0 mm
0.0 mm
0.0 mm
–
4 mm
0 mm
0 mm
0
0
0
0
0
C250