Main Messages And Their Remedies - Konica Minolta BIZHUB C250 User Manual

5
5.8

Main messages and their remedies

Message
Original left on glass.
Matching paper size is
not available.
Select paper size.
Place paper in Bypass
Tray.
Original size cannot be
detected.
Select paper size.
Image will not fit on se-
lected paper size. Place
the originals different di-
rection.
This mode is not availa-
ble with XXX.
Output Tray has reached
its maximum capacity.
Please remove all pages
from → tray.
Input User Name and
Password to login and
press Access key.
Input Account Name and
Password to login and
press Access key.
Your account has
reached its maximum
color-copy (black-copy)
allowance.
Close → Section proper-
ly.
5-50
Cause
The document was left on the
original glass.
Paper of a suitable size is not
loaded in a paper tray.
Paper of a suitable size is not
loaded in the bypass tray.
➀ The document is not posi-
tioned correctly.
➁ A document with a non-
standard size or with a size
too small to be detected is
loaded.
The image does not fit in the
paper.
Functions that cannot be
used together are selected.
Since the maximum amount
of copies for the indicated fin-
isher exit tray has been ex-
ceeded, the machine is
unable to make copies.
User authentication settings
have been specified. Copies
cannot be made unless a
user name and its correct
password are entered.
Account track settings have
been specified. Copies can-
not be made unless an ac-
count name and its correct
password are entered.
The limit on the number of
copies that can be made has
been reached.
Since a machine door or cov-
er is open or an option is not
installed correctly, the ma-
chine is unable to make cop-
ies.
Troubleshooting
Remedy
Remove the document from the
original glass.
Either select a different copy size or
load paper of a suitable size.
Load paper of the appropriate size
into the bypass tray.
➀ Position the document correctly.
➁ Select the correct paper size.
Load the document turned 90°.
Make copies using only one of the
functions.
Remove all copies from the indicat-
ed tray.
Type in your user name and pass-
word. (See "Controlling each user's
use of this machine (user authenti-
cation)" on page 2-36.)
Type in your account name and
password. (See "Controlling each
account's use of this machine (ac-
count track)" on page 2-39.)
Contact your administrator.
Make sure that all doors and covers
are closed and that all options are
installed correctly.
C250