GE NX-4-EUR Installation Manual page 61

LOCATION 76 - LOG FULL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical data)
Location 76 contains the tens and ones digits for a 4+2 and 3+1 format if the "Log Full
Reporting" is enabled. Segment 1 contains the tens digit, and segment 2 contains the ones
digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
LOCATION 77 - OPENING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical data)
Location 77 contains the tens digit for a 4+2 and 3+1 format if "Opening Reporting" is enabled.
For a 4+2 format, the digit programmed in this section will be sent as the tens digit of the
alarm event code. As ones digit, the user number will be reported (e.g. code 1 = 1, code 8 = 8).
If you need to report openings and closings with a unique code per user, Contact ID or SIA
format must be used.
Segment 1
Segment 2-8
LOCATION 78 - CLOSING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical data)
Location 78 contains the tens digit for a 4+2 and 3+1 format if "Closing Reporting" is enabled.
For a 4+2 format, the digit programmed in this section will be sent as the tens digit of the
alarm event code. As ones digit, the user number will be reported (e.g. code 1 = 1, code 8 = 8).
If you need to report openings and closings with a unique code per user, Contact ID or SIA
format must be used.
Segment 1
Segment 2-8
LOCATION 79 - AUTOTEST COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical data)
Location 79 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
"Autotest" or "Manual Test" is enabled. Segment 1 contains the tens digit, and segment 2
contains the ones digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
NX-4-EUR Installation manual
Codes 1-8, "Opening Code"
Reserved
Codes 1-15, "Closing Code"
Reserved
Page 61 02/07/06