GE NX-4-EUR Installation Manual page 23

[*]-[▲] VIEW ZONE STATUS
1.
2.
3.
[*]-[3] VIEW ALARM MEMORY
1.
2.
3.
[*]-[4]-[5] DISPLAY TEST
The keyboard also provides a test function by the means of which the LCD display and all
LED's are tested.
Step 1
Step 2
[*]-[4]-[9] MODIFYING LANGUAGE
The possibility exists to modify the language on the LCD display from one language to another
and the other way around.
Step 1
Step 2
[*]-[5] CHANGING USER CODES:
Note: For partitioned systems, someone changing the code of another person must have
access to all partitions, or to more partitions than the user being changed.
1.
2.
3.
4.
5.
6.
7.
NX-4-EUR Installation manual
Enter [*]-[▲]
Use the 'up' and 'down' scroll
keys to browse through the
descriptions.
Press [#] to exit this function.
Enter [*]-[3]
Use the 'up' and 'down' scroll
keys to browse through the
alarm memory.
Press [#] to exit this function.
Press [*] [4] [5]. The display and the LED's will blink.
Press the [*] key to leave the display test.
Press [*] [4] [9]. The LCD display switches to the other language.
To switch back to the other language, only step 1 has to be repeated.
Enter [*]-[5]
Enter [master code]
Enter the 2 digit user number
(always 2 digits, i.e. "03" for
user 3)
Enter the new user code designated for the person in question. If the code is rejected,
the sounder will beep three (3) times.
If another user code needs to be programmed, return to step 3.
To exit code programming, press [#] while the LCD screen is prompting for a new user
number.
REMARK: Pressing four times (for 4-digit code) can erase a user code or six times (for
6-digit code) the "Cancel" key.
Page 23
The LCD screen will display the zone status.
The LCD screen will display the list of ALL zones, in
sequential order by zone number.
The LCD screen will display the zone description for
the zones.
The LCD screen will display the list, in sequential order
by zone number.
The LCD screen will prompt for a code.
The LCD screen will prompt for a user number.
The LCD screen will prompt for a new code.
02/07/06