Deregister The Sensor - VTech VC7151-102A User Manual

Deregister the Sensor

If you have purchased a new accessory sensor to replace an old sensor, follow the
instructions to deregister your old sensor.
To replace a sensor, deregister the registered sensor first, and then register this
new sensor to the telephone base.
To deregister a single sensor:
1. Press MENU on the handset or the telephone base when idle.
Enter the code *33734# to access the DEREGISTER menu.
2.
on the handset, or CALLS / or PHONEBOOK / to scroll to
3. Press or
Single sensor, and then press SELECT.
on the handset, or CALLS / or PHONEBOOK / to scroll to the
4. Press or
sensor you want to deregister, and then press SELECT.
YES
5. Press to confirm the deregistration.
The telephone base shows Contact X is deregistered or Motion X is
deregistered and you hear a beep when the deregistration process completes.
To deregister all sensors:
Press MENU on the handset or the telephone base when idle.
1.
Enter the code *33734# to access the DEREGISTER menu.
2.
on the handset, or CALLS / or PHONEBOOK / to scroll to
3. Press or
All sensors, and then press SELECT.
The screen displays Deregister all sensors?. Press
4.
deregistration.
The handset or telephone base shows All sensors are deregistered and you hear
a beep when the deregistration process completes.
YES
71
to confirm the