Set Number of Rings
You can set the answering system to answer an incoming
call after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll
saver, the answering system answers after 2 rings when you
have new messages, or after 4 rings when you have no new
messages.
1.
Press MENU on the handset or telephone base when idle.
on the handset, or CALLS / or
2.
Press
or
PHONEBOOK / on the telephone base to scroll to
Answering sys, and then press SELECT.
on the handset, or CALLS / or
3.
Press
or
PHONEBOOK / on the telephone base to scroll to Ans sys setup, then press
SELECT.
4.
Press
or
on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to # of rings, then press SELECT.
on the handset, or CALLS / or PHONEBOOK / on the
5.
Press
or
telephone base to scroll to choose 6, 5, 4, 3, 2 or Toll saver, and then press
SELECT.
Message Alert Tone
When the message alert tone is set to on, and there is at least one new message,
the telephone base beeps every 10 seconds. The message alert tone is preset to
off.
Press MENU when the phone is not in use.
1.
on the handset, or CALLS / or PHONEBOOK /
2.
Press
or
telephone base to scroll to Answering sys, and then press SELECT.
on the handset, or CALLS / or PHONEBOOK /
3.
Press
or
on the telephone base to scroll to Ans sys setup, then press SELECT.
4.
Press
or
on the handset, or CALLS / or PHONEBOOK /
on the telephone base to scroll to Msg alert tone, then press SELECT.
on the handset, or CALLS / or PHONEBOOK /
5.
Press
or
telephone base to scroll to choose On or Off.
SELECT
6.
Press
to save and you hear a confirmation tone.
61
on the
on the