Sensor Battery - VTech VC7151-102A User Manual

Sensor Battery

After you have installed the sensor battery, when the battery is low, the battery
indicators will show the low battery status (see the table followed).
Battery indicators
The handset and
telephone base screen
show Replace batt in
Contact X* or Motion X*.
*
Contact X or Motion X refer to the sensor's name.
X refers to the system-assigned number of the sensor. You can edit the sensor's name to your
preferred name. See Rename the sensor on page 40.
Battery status
The sensor battery is low.
20
Action
Replace the sensor batteries
as follows:
1. Press and hold CANCEL
on the handset or
telephone base to erase
the message.
2. Remove the old batteries
from the battery
compartment, and then
press the pair key.
3. Insert new batteries into
the battery compartment.