Open Firmware Command Line - IBM RS/6000 7043 43P Series Service Manual

Open Firmware Command Line

The text-based Open Firmware command line allows you to configure some
adapters, and the System Management Services makes it possible for you to view
information about your system unit and to perform such tasks as setting passwords
and changing device configurations.
To enter the Open Firmware command line, you must press the 8 key after the
keyboard text symbol appears during startup.
If you have pressed the 8 key, the Open Firmware command line (an "OK" prompt)
appears after the initialization and power-on self tests (POST) are complete.
The Open Firmware command line can be used to set up adapters that are not
configurable with the System Management Services. Your adapter documentation
directs you to use this option if it is needed.
7-44
7043 43P Series Service Guide