IBM RS/6000 7043 43P Series Service Manual page 209

Replacement
1. Install the cover by placing it close to the front of the system unit, as shown.
Slide the cover toward the front of the system unit while holding down the cover
latch.
2. Reconnect all device cables, such as the printer and display; then plug the power
cords into properly grounded electrical outlets.
3. If you have a modem or fax machine attached to the system unit, reconnect the
telephone line to the system unit and the wall outlet.
Cover L atch
Cover L ock
Chapter 8. Removal and Replacement Procedures
8-5