IBM RS/6000 7043 43P Series Service Manual page 113

Table 3-4 (Page 4 of 5). Firmware Checkpoints.
Checkpoint Description
FEA Firmware flash corrupted, load from
diskette.
FEB Firmware flash corrupted, load from
diskette.
FF2 Power-On Password prompt.
FF3 Privileged-Access Password prompt
Chapter 3. Error Code to FRU Index for Model 140 and Model 240
Action/
Possible Failing FRU
Ensure that the diskette installed
contains recovery image appropriate
for this system unit.
The System Management Services
recovery procedure for the flash
EEPROM should be executed. See
"Firmware Update" on page 7-24.
If the diskette is installed with the
correct recovery image, then
suspect
1. Diskette
2. Diskette drive
3. Diskette cable
4. System board (See notes on
page 3-1.)
Ensure that the diskette installed
contains recovery image appropriate
for this system unit.
The System Management Services
recovery procedure for the flash
EEPROM should be executed. See
"Firmware Update" on page 7-24.
If the diskette is installed with the
correct recovery image, then
suspect
1. Diskette
2. Diskette drive
3. Diskette cable
4. System board (See notes on
page 3-1.)
If a console is attached but nothing
is displayed on it, go to the "Entry
MAP" on page 2-1 with the
symptom "All display problems."
If a console is attached but nothing
is displayed on it, go to the "Entry
MAP" on page 2-1 with the
symptom "All display problems."
3-17