IBM RS/6000 7043 43P Series Service Manual page 99

Table 3-1 (Page 2 of 2). POST Error Codes
Error Code Description
M0SCSI00 Unable to load diagnostics.
M0SCSI01 Unable to load diagnostics.
M0SPK000 A continuous beep is heard from the system.
M0SPK001 The system does not beep.
M0BT0000 Speaker (audio) error
M0NET000 Network error
Chapter 3. Error Code to FRU Index for Model 140 and Model 240
Action/
Possible Failing FRU
Go to "MAP 1540: Minimum
Configuration" on page 2-21.
Go to "MAP 1540: Minimum
Configuration" on page 2-21.
System board (See notes on
page 3-1.)
1. Speaker
2. System board. (See
notes on page 3-1.)
Record the code displayed
on the operator panel. If the
code is listed in "Firmware
Checkpoints" on page 3-14
then perform the indicated
action. If the code is not
listed, go to "MAP 1540:
Minimum Configuration" on
page 2-21.
Record the code displayed
on the operator panel. If the
code is listed in "Firmware
Checkpoints" on page 3-14
then perform the indicated
action. If the code is not
listed, go to "MAP 1540:
Minimum Configuration" on
page 2-21.
3-3