Diag Command Line Options - IBM R/S6000 7012 300 Series Operator's Manual

The following section describes the 4.2 Diagnostic Subsystem.

diag Command Line Options:

COMMAND LINE OPTIONS:
diag Command line flags are as follows:
–a
–c
–d resource
–e
–s
–A
–B
–v
–S
Entering diag –h from the command line will print out an
appropriate usage statement.
Default execution mode will be non–advanced mode.
3-26
Operator Guide
Perform missing device analysis.
Machine is unattended.
Test the named resource.
The "resource" parameter is the /dev entry.
Error Log Analysis.
Checks the error log for device specified in
"resource" of the –d option.
Test the system.
Advanced Diagnostics
Base system test
System Verification mode.
Test the Test Suite Group
1 – Base system
2 – I/O Devices
3 – Async Devices
4 – Graphics Devices
5 – SCSI Devices
6 – Storage Devices
7 – Commo Devices
8 – Multimedia Devices
No prompts should be displayed.