Avaya D100 Installation And Administration Manual page 24

System configuration
2. Right-click any extension and select New > SIP DECT Extension.
3. Configure the extension parameters.
4. Navigate to the SIP DECT Base tab and select the base station to which this
extension belongs.
5. Press OK.
6. Confirm the creation of an associated user. Select Yes to accept or No to cancel.
If you select Yes, the system opens the user configuration window.
7. Configure the user as you would for a regular SIP extension.
8. Navigate to the Telephony > Supervisor Settings tab and configure the Login
code for the user.
9. Press OK.
24 D100 SIP Wireless Terminal Installation and Administration Guide
Comments? infodev@avaya.com
December 2012