Removing The Optional Front Bezel; System Cover; Removing The System Cover - Dell DL1300 Owner's Manual

4. Lock the bezel by using the key.
Figure 7. Installing the optional front bezel
1. release latch
3. front bezel

Removing the optional front bezel

1. Unlock the keylock at the left end of the bezel.
2. Lift the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the system.

System cover

The system cover protects the components inside the system and helps in maintaining air flow inside the
system. Removing the system cover actuates the intrusion switch which aids in maintaining system
security.

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
4. If installed, remove the optional bezel. For more information, see the Removing the optional front
bezel section.
5. If installed, remove the front bezel.
2. lock
51