Table of Contents
Advertisement
Figure 20. Install the system cover
3. Push the enclosure back into the rack and tighten the thumbscrews.
Install the front bezel (optional)
The enclosure includes an optional bezel that you can attach to the front of the enclosure.
Steps
1. Align the bezel with the enclosure front panel.
CAUTION:
Ensure that the bezel clips on each corner align with their respective ball studs on the chassis.
2. Gently push the bezel into place until it latches.
Figure 21. Install the bezel
22
Installing the enclosure
Advertisement
Table of Contents
Troubleshooting
