Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell DL1300 Owner's Manual

5. slot on the system board
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Before working inside your system
After working inside your system
Installing the system board
Safety instructions
System board jumpers and connectors

Initializing the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
9. From the Intel TXT option, select On.
106
http://technet.microsoft.com/en-us/library/