Opening The Console; Removing The Front Bezel - Dell EMC Data Domain DD9800 Installation Manual

Installation and storage expansion guide

Hide thumbs Also See for EMC Data Domain DD9800:

Table of Contents

Opening the console

About this task

The console is a protruding plastic banner on the front of the cabinet with a stripe of blue or green light and the product badge.

If the console is covering the front of the shelf to which you need access, open the console using the steps that follow.

Steps

1. Grasp the right side of the console.

2. Pull the console to swing it open.

Figure 77. Opening the console

About this task

NOTE:

You must remove the front bezel to gain access to the internal components. Remove it only to replace or add an

internal component.

Steps

1. If the bezel has a lock, insert the key that shipped with your shelf into the lock, and turn the key to unlock the bezel.

2. Press the two latch buttons on the bezel surface to release the bezel from the cabinet.

3. Pull the bezel off the cabinet and put it on a clean, static-free surface.

CL4699

Add Storage Capacity

Table of Contents