Lcd Panel - Dell DL1300 Owner's Manual

Item Indicator, button, or
connector
4 Video connector
5 LCD menu buttons
6

LCD panel

7 USB management port/
iDRAC Direct port
8 USB connector
9 Information tag
10 Hard drives
LCD panel
The LCD panel of your system provides system information, status, and error messages to indicate if the
system is functioning correctly or if the system needs attention. For more information about error
messages, see the Dell Event and Error Messages Reference Guide at Dell.com/
openmanagemanuals >OpenManage software.
• The LCD backlight turns blue during normal operating conditions.
• When the system needs attention, the LCD turns amber, and displays an error code followed by
descriptive text.
NOTE: If the system is connected to a power source and an error is detected, the LCD turns
amber regardless of whether the system is turned on or off.
• The LCD backlight is turned off when the system is in standby mode and can be turned on by pressing
either the Select, Left, or Right button on the LCD panel.
• The LCD backlight remains off if LCD messaging is turned off using the iDRAC utility, the LCD panel,
or other tools.
Icon Description
pressed, the LCD panel on the front and the
system status indicator on the back flash until one
of the buttons is pressed again.
Press the button to turn the system ID on and off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15
seconds.
Enables you to connect a display to the system.
Enable you to navigate the control panel LCD
menu.
Displays system ID, status information, and system
error messages. See the LCD panel section.
Functions as a regular USB port or provides access
to the iDRAC Direct features. For more
information, see the iDRAC User's Guide at
Dell.com/idracmanuals.
Enables you to connect USB devices to the system.
The port is USB 2.0-compliant.
Contains system information such as service tag,
NIC, MAC address for your reference. The
information tag is a slide-out label panel.
Enables you to install up to four 3.5-inch hot
swappable hard drives in 3.5-inch hot swappable
adapters.
9