Cooling Fans - Dell DL1300 Owner's Manual

Steps
1. Press the release button on the front of the hot swappable hard drive carrier and open the hot
swappable hard drive carrier handle.
2. Insert the hot swappable hard drive carrier into the hard drive slot, and push the hot swappable hard
drive carrier until it comes in contact with the backplane.
3. Close the hot swappable hard drive carrier handle to lock the hot swappable hard drive carrier in
place.
Figure 19. Installing a hot swappable hard drive carrier
1. release button
3. hard drive carrier handle
Next steps
If removed, install the front bezel.
Related Links
Installing a hot swappable hard drive into a hot swappable hard drive carrier
Installing the optional front bezel

Cooling fans

Depending on your system configuration, your system can support up to four cooling fans.
NOTE: Hot swappable removal or installation of the fans is not supported.
NOTE: Each fan is listed in the management software of the system, referenced by the respective
fan number. If there is a problem with a particular fan, you can easily identify and replace the proper
fan by noting down the fan numbers provided on the cooling fans.
The following table shows the number of fans required for different system configurations:
NOTE: Ensure that you install a cooling fan blank in an empty cooling fan bracket.
2. hard drive carrier
69