Installing The Led Control Panel Assembly; System Board - Dell DL1300 Owner's Manual

3. control panel board
5. standoff on the chassis (2)
Next steps
1. Install the LED control panel assembly.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Before working inside your system
After working inside your system

Installing the LED control panel assembly

Safety instructions
Installing the LED control panel assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Insert the control panel board into the slot in the chassis and align the two screw holes on the
control panel board with the corresponding holes on the chassis.
2. Secure the control panel board with the screws.
3. Connect all the cables to the control panel board.
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Before working inside your system
After working inside your system
Safety instructions

System board

A system board (also known as the motherboard ) is the main printed circuit board found in computers .
The system board allows communication between many of the crucial electronic components of the
computer, such as the central processing unit (CPU) and memory, and also provides connectors for other
peripherals. Unlike a backplane, a system board contains significant number sub-systems such as the
processor expansion cards, and other components.
4. USB connector cable
99