Release Trip - Pfaff 1245 Instruction Manual

11.

Release trip

05.05
11 - 24
In needle rise position and with control lever
approx. between the bolt of the control lever and the base of the cam track.
Fig. 11 - 21
Bring the machine to needle rise position by turning the handwheel.
Manually activate engaging lever 1 so that pawl
Taking care to ensure that screw
of the track of control cam .
Maintaining this position, lightly tighten screw
resting position against engaging lever
direction of the arrow.
By lightly tapping on release trip
tapping control lever , create a distance between the bolt and the base of the cam track
which corresponds with the
In this position tighten screw
Carry out a check in accordance with the requirement.
engaged, there must be a distance of
engages.
is still loose, press control lever
while bringing release trip
and laterally against control lever
in the direction of the arrow, while simultaneously
down to the base
into a
in the