Thread-Catcher Height - Pfaff 1245 Instruction Manual

11.

Thread-catcher height

05.11
(On Model 1246 make these adjustments on both thread catchers.)
11 - 30
When thread catcher 2 is pushed forwards manually with the take-up lever at its TDC, the
lower point of the thread catcher must pass
Fig. 11 - 26
Loosen screw enough so that thread catcher
Loosen the screws in retaining collar .
Bring the take-up lever to its TDC by turning the handwheel.
Move thread catcher
In this position, and taking care to ensure that retaining collar
bushing, tighten screws
Carry out a check in accordance with the
Screw remains loosened for the following adjustment.
in accordance with the
of the retaining collar.
over the back of hook .
can be turned.
is touching the shaft