Tension Release - Pfaff 5483 Adjustment Manual
Hide thumbs
Also See for 5483:
- Instruction manual (78 pages) ,
- Service manual (60 pages) ,
- Supplement to the instruction manual (32 pages)
Table of Contents
Advertisement
Adjustment
1
Tension release
.06.05
● Fully actuate the cylinder of the thread-trimming device.
● Adjust plate 1 (screw 2) according to the requirement.
44
Requirement
When the cylinder is fully actuated, there must be a clearance of about 0.5 mm between
the top end of the elongated hole in plate 1 and the guide pin 3.
1
3
2
Fig. 1 - 37
0,5 mm
Advertisement
Table of Contents
