Bobbin Winder - Pfaff 1245 Instruction Manual

11.

Bobbin winder

04.16
11 - 18
1. With the bobbin winder switched on, the bobbin winder spindle must engage reliably.
With the bobbin winder switched off, friction wheel must not touch drive wheel .
2. The bobbin winder must switch off automatically when the thread level is approximately
from the edge of the bobbin.
Fig. 11 - 15
Move drive wheel (screws )
Place a bobbin on the bobbin winder, thread the bobbin and switch on the bobbin winder.
Move stop latch (screws ) in accordance with