Thread Catcher Reverse Position - Pfaff 1245 Instruction Manual

11.

Thread catcher reverse position

05.13
(On Model 1246 make these adjustments on both thread catchers.)
11 - 32
At the front point of reversal of thread catcher , its rear edge must be flush with the
cutting edge of knife (see arrow).
Fig. 11 - 28
Taking care to ensure that screw
position and activate the engaging lever.
By continuing to turn the handwheel, bring rock shaft
Maintaining this position, turn thread catcher
is loosened, bring the machine to needle rise
to its left point of reversal.
in accordance with the