15
Tension release
.04.16
Requirement
6 should be at least 0.5 mm apart
1. when lever 1 is raised,
2. when solenoid 4 is pressed.
Fig. 15 - 16
Raise lever 1 and adjust screw 2 (nut 3) in accordance with requirement 1.
Press solenoid 4 as far as possible.
Adjust solenoid 4 (screws 5) in accordance with requirement 2.
2
1
3
The point of time when the tensioned is released by solenoids 4 can be set with-
the service functions, see Chapter 15.07 Parameter settings.
Adjustment
5
4
0,5 mm
6
25