Centering The Needle In The Needle Hole - Pfaff 1245 Instruction Manual

11.

Centering the needle in the needle hole

04.05
11 - 6
With the stitch length set at „0" , the needle must enter the needle hole exactly in the
middle.
Fig. 11 - 05
Unscrew vibrating presser
Set stitch length „0" and bring the needle bar to its TDC.
Insert a new needle. Loosen screws
Position the needle directly over the bottom feed dog by turning the handwheel.
Move needle bar frame 7 in accordance with the
Tighten screws and .
Position stop so that it is touching needle bar frame
The movement of needle bar frame
must not be stiff.
and presser foot .
and
in guide
and tighten screw
and of the top feed drive bars