11.
Engaging solenoid
05.04
In needle rise position and with engaging solenoid
of
Fig. 11 - 20
Bring the machine to needle rise position by turning the handwheel.
Loosen screw
Manually activate engaging lever 2 so that pawl
Press magneto inductor
solenoid housing and the magneto inductor in accordance with the
In this position tighten screw .
between engaging lever
until the engaging solenoid can be turned with difficulty.
as far as possible into solenoid housing
activated, there must be a distance
and pawl .
engages.
and move both the
11 - 23