Saving The Settings (Memory) - Pentax Optio MX Operating Manual

Saving the Settings (Memory)

You can choose whether you want the set values to be saved when the
camera is turned off or returned to the defaults. The items that can be
saved or reset are listed below. If you select O (On), the settings will be
saved in the status they were in immediately before the camera was
turned off. If you select P (Off), the settings will be reset to the defaults
when the camera is turned off. Items not listed here will also be saved in
the selected settings when the camera is turned off.
Item
Flash Mode
Drive Mode
4
Focus Mode
Zoom Position The optical zoom position set with the Zoom lever (1p.50)
MF
White Balance
Focusing Area
AE Metering
Sensitivity
EV
Compensation
Flash Exp.
Comp.
Digital Zoom
DISPLAY
File #
The zoom position setting in the digital zoom range will not be saved
even if [Zoom Position] is set to On in [Memory].
82
The flash mode set with the b button (1p.68)
The drive mode set with the m button (1p.52, 53, 56)
The focus mode set with the ) button (1p.66)
The manual focus position set with the ) button (1p.67)
The [White Balance] setting on the [A Rec. Mode] menu
(1p.72)
The [Focusing Area] setting on the [A Rec. Mode] menu
(1p.74)
The [AE Metering] setting on the [A Rec. Mode] menu
(1p.75)
The [Sensitivity] setting on the [A Rec. Mode] menu
(1p.76)
The EV compensation value set with the four-way
controller (45) (1p.81)
The [Flash Exp. Comp.] setting on the [A Rec. Mode]
menu (1p.69)
The [Digital Zoom] setting on the [A Rec. Mode] menu
(1p.51)
The LCD monitor display mode (1p.64, 99)
The file number is saved. If a new SD Memory Card is
inserted when On has been selected, file numbers are
assigned sequentially.
Description
Default
Setting
O
P
P
P
P
P
P
P
P
P
P
O
P
O