Messages - Pentax Optio MX Operating Manual

Messages

Messages such as the following may appear on the LCD monitor during
camera operation.
No image & sound
Memory card full
Memory card error
Card not formatted
Card locked
Data being recorded
Camera cannot replay
this image/sound
Deleting
Battery depleted
Can not save image
Formatting...
Image folder could
not be created
Image & sound
protected
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
No paper
No ink
Printer error
Data error
Paper stuck
There are no image/sound files on the SD Memory Card.
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images.
(p.17, 103)
Change the quality/size and try again. (p.108)
Shooting and playback are impossible due to a problem
with the SD Memory Card. It may work on your PC. The SD
Memory Card is unformatted.
The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with this camera. (p.120)
The SD Memory Card is write-protected. (p.18)
The image is being recorded on the SD Memory Card.
The protect setting or DPOF setting is being changed.
The movie is being recorded.
You are trying to play back an image or sound file in a
format not supported by this camera. You may be able to
play it back on another brand of camera or PC.
The image is being deleted.
The battery is exhausted. Replace with a new battery. If
using a rechargeable battery, charge the battery. (p.15)
The SD Memory Card is being formatted.
The largest file number has been assigned to an image in
the largest folder number and no more images can be
saved. Insert a new SD Memory Card or format the SD
Memory Card. (p.120)
The image or sound file you are trying to delete is protected.
There is no paper in the printer.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper in the printer has stuck.
10
135