Saving The Settings (Memory) - Pentax OPTIO L50 Operating Manual

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On) (the
settings are saved when the camera is turned off), while for others you can
choose on or off (to choose whether the settings are saved or not when the
camera is turned off). The items which can be set to O (On) or P (Off) in the
Memory function are shown in the table below. (Items not listed here are
always saved in the selected settings when the camera is turned off.) If you
select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the
settings will be reset to the defaults when the camera is turned off. The table
4
below also shows whether the Memory default setting for each item is on or
off.
Item
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position The zoom position set with the Zoom/w/x button (p.78)
MF Position
White Balance
Sensitivity
EV
Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
106
A Face Recognition mode set by using the I button.
The flash mode set with the four-way controller (4) (p.89)
The drive mode set with the four-way controller (2) (p.76,
p.77)
The focus mode set with the four-way controller (5) (p.87)
The manual focus position set with the four-way controller
(23) (p.88)
The [White Balance] setting on the [A Rec.Mode] menu
(p.94)
The [Sensitivity] setting on the [A Rec.Mode] menu (p.98)
The [EV Compensation] setting on the [A Rec.Mode]
menu (p.84)
The [AE Metering] setting on the [A Rec.Mode] menu
(p.96)
The [Digital Zoom] setting on the [A Rec.Mode] menu
(p.80)
The display information display mode set with the 4/
W button (p.85, p.121)
If a new SD Memory Card is inserted when On has been
selected, file numbers are assigned sequentially.
Description
Default
Setting
P
O
P
P
P
P
P
P
P
P
O
P
O