Displaying Shooting Information In Capture Mode - Pentax Optio MX Operating Manual

Displaying Shooting Information in
Capture Mode
The LCD monitor display changes each time you press the OK button.
If [FILT.] has been registered on the OK button, change the setting to
[DISPLAY] on the [B Set-up] menu. (1p.124)
Norm. (Normal display)
Shooting information appears when the camera is
turned on.
1 Flash mode
3 Focus mode
5 Digital filter
7 Remaining image count
9 Card status
11 EV compensation
4
13 Battery level indicator
15 Aperture
H+inf (Histogram and information)
The brightness distribution of the image is
displayed. The horizontal axis of the histogram
shows the brightness (darkest at the left end and
brightest at the right end) and the vertical axis
shows the number of pixels.
1 White balance
3 Quality level
5 Histogram
Grid (Grid display or Normal display in
Playback mode)
A grid appears to help you compose your
pictures.
Frame (Frame only and no information)
No shooting information is displayed.
• The focus frame appears in Autofocus mode.
• If any of the modes are changed, such as the
flash mode, the new setting appears on the
LCD monitor for a few seconds.
Saving the Display Mode 1p.82
64
2 Drive mode
4 Capture mode
6 Digital zoom
8 Remaining time
10 Date and time
12 Focus frame
14 Shutter speed
2 Recorded pixels
4 Sensitivity
6 AE metering
1 2 3 4 5 6
a a g g r r
y y
0 0 : 0 0 0 0 : 0 2 0 2 0 2 : 4 8 :
1 / 3 0 1 / 3 0 1 / 3 0 0 7 0 7 0 7 / / 2 5 2 5 2 5 / / 2 0 0 4 2 0 0 4 2 0 0 4
# #
F 2 . 9 F 2 . 9 F 2 . 9 - 0 . 2 5 - 0 . 2 5 0 . 2 5 1 4 1 4 1 4 : :
15 1413 12 11 10
1 2
a a g g
r r
y y
0 0 0 0 : 0 0 : 0 2 0 2 0 2 : : 4 8
2048 2048 2048
AWB AWB AWB
AUTO AUTO AUTO
1 / 3 0 1 / 3 0 1 / 3 0
# #
F 2 . 9 F 2 . 9 F 2 . 9 - 0 . 2 5 - 0 . 2 5 0 . 2 5
6 5
Norm. (Normal display)
7 8
3 8 3 8 3 8
4 8 4 8
2 5 2 5 2 5
9
3
3 8 3 8 3 8
4 8 4 8
4