Q172Lx Servo External Signals Interface Module - Mitsubishi Q172CPU User Manual

2 SYSTEM CONFIGURATION

2.4.4 Q172LX Servo external signals interface module

Q172LX receives external signals (servo external signals) required for positioning
control.
(1) Q172LX name of parts
5)
6)
No. Name
1) Module fixing hook
2) Mode judging LED
3) CTRL connector
4) Module loading lever
Module fixing screw
5)
hole
6) Module fixing hook
POINT
Mode judging LED turns ON at the following conditions.
(1) DOG/CHANGE
(a) Q172LX is set on the system setting display of SW6RN-GSV P.
(b) DOG/CHANGE signal is input.
Hook used to fix the module to the base unit.
(Quick release installation)
Display the servo external input status from the external
equipment.
LED
Indicates to display the servo external signal
0 to 1F
input status of each axis.
This LED is not turned on if it is not set the Q172LX in the
system settings.
The servo external signal input connector of each axis.
Used to install the module to the base unit.
Hole for the screw used to fix to the base unit.
(M3×12 screw : Purchase from the other supplier)
Hook used to fix to the base unit.
2 - 46
Q172LX
CTRL
Q172LX
Application
Details
1)
2)
3)
4)