Image Repeat Copy - Kyocera Mita C2525E Advanced Operation Manual

Copy Functions

Image Repeat Copy

Tiles the 1 copied sheet with an original image. You
can also specify the area of the original to repeat.
NOTE: This function is only available when
Auto-Rotate (see page 1-41) is set to [Off].
Follow the steps as below to use Image Repeat Copy.
1 Place the original.
2 Press [Function] and then press [
3 Press [Image Repeat].
4
Press [Auto zoom priority].
5 Press [+] or [–] to set the zoom size.
Press [# keys] to enter with numeric keys.
6
To set the area of the original to be repeated, press [On] for Set Orig. Area and then press [Change
#].
7 Press [+] or [–] to input the area of the
original to be repeated.
With metric models, you can enter the
border width directly using the numeric
keys afer pressing [#-Keys].
Y1: Length from top left of platen to top edge of repeat
area
X1: Length from Height from top left of platen to left
edge of repeat area
Y2: Height of repeat area
X2: Width of repeat area
8 Press [Close].
9 Press the Start key. Copying begins.
1-48
Original
Down].
Ready to copy.
Image Repeat
( 25~400)
Off
Auto zoom
priority
# keys
Ready to copy.
Set orig. dimensions
( 0~11
9/16
.
1/16
Copy
( Full-Color ) Paper Size
Shortcut Back
SetOrig.Area
Off
On
( Full-Color ) Paper Size
Shortcut Back
) ( 0~16 ) ( ~11 )
15/16 1/16 5/8
. .
1/16 1/16
" "
11×8
100%
11×8
100%
"