AMERITECH AM5 Instruction Manual page 6

AM5(e) Classic Instruction Manual
FILTERS FOR AM5 Classic describes the Noise-Weighting filters
SECTION 7 —
that are provided to IEEE standards.The Filters are switched by
the FILTER key into the measurement circuitry for noise tests.
Included in these sections are frequency response graphs for each
filter type.
FILTERS FOR AM5e Classic describes the Noise-Weighting
SECTION 8 —
filters that are provided to CCITT standards.The Filters are
switched by the FILTER key into the measurement circuitry for
noise tests. Included in these sections are frequency response
graphs for each filter type.
SEND FUNCTIONS AND PARAMETERS describes each signal
SECTION 9 —
generation function that may be selected by the SEND key on the
front panel. Included in the description are all parameters that
may be changed for each signaling requirement.
AM5/AM5e CLASSIC TECHNICAL SPECIFICATIONS provides a
SECTION 10 —
tabular listing of the specifications for the AM5 Classic and the
AM5e Classic.
WARRANTY AND SERVICE POLICY provides information on
SECTION 11 —
warranty and on returning unit to Ameritec for service.
November 19, 1997
(18-0047)
iii
INTRODUCTION