AM5(e) Classic Instruction Manual
For the AM5(e) Classic models that have extended frequency response, the following
designation plate appears on the lower-left side of the panel:
The front panel contains push-button switches, LED indicators, and LED displays for
setting test conditions and displaying measurements. A speaker volume control knob
is also located on the front panel. Bantam jacks are provided for line connections
(duplicated on the rear panel as terminals) and two terminals are provided for a user's
"Butt Set" to allow dialing and talking by the user.
All push button keys are non-membrane type, and offer good visual, tactile, and
audible feedback. All indicators, including the display, are LEDs and should never
need replacement.
The remaining sub-sections in Section 3 describe the controls, indicators, and displays
on the front panel. The numbering of the sub-sections corresponds with the
identifications of sub-sections shown on Figures 3-1 and 3-2.
Further descriptions are contained in the other Sections of this manual which describe :
•
Self Test Operations
•
Line Test Connections and Configurations
•
Measure Functions and Parameters
•
Filters for AM5 Classic
•
Filters for AM5e Classic
•
Send Functions and Parameters
November 19, 1997
(18-0047)
200 kHz
Page 3-4
DESCRIPTION
Section 4
Section 5
Section 6
Section 7
Section 8
Section 9