Nortel Contivity 1010 Manual page 38

38 Chapter 2 Getting started
→Identity
Figure 10 System
To configure a DNS server:
1
Got to the System→Identity screen.
2 The DNS Proxy Enabled/Disabled check box allows you to select whether
you want the DNS Proxy to act as a DNS server to the private side. It it
enabled by default.
3 Click on the Split DNS check box if you have a split name space.
4
For Primary, enter the address of the DNS server that the DNS proxy tries to
contact first.
5 For Second, enter an address for the Second Domain Name System (DNS)
server. If the Primary DNS server doesn't respond in a few seconds, service is
requested of the Second DNS server (if present).
315535-A Rev 00
screen