Lenovo S500z Hardware Maintenance Manual page 99

3. Remove the screw 1
Stand up to remove it from the computer.
Figure 23. Removing the UltraFlex II Stand
4. Remove the screw that secures the UltraFlex II Stand base to remove it from the UltraFlex II Stand.
Figure 24. Removing the UltraFlex II Stand base
5. Align the screw hole in the UltraFlex II Stand base with the corresponding hole in the new UltraFlex II
Stand. Then, install the screw to secure the base to the UltraFlex II Stand.
that secures the UltraFlex II Stand to the computer. Then, lift the UltraFlex II
.
Chapter 9 Installing or replacing hardware
93