3. Remove the two screws that secure the monitor stand. Then, lift the monitor stand to remove it from the
computer cover.
Figure 19. Removing the monitor stand
4. Rotate the bottom cover of the base to display the screw
monitor stand from the base as shown.
Figure 20. Removing the monitor stand from the base
5. Insert the three metal studs on the base into the corresponding holes in the new monitor stand. Then,
rotate the bottom cover of the base to display the screw
stand.
1
. Then, loosen the screw
1
and tighten the screw to secure the monitor
.
Chapter 9
Installing or replacing hardware
1
and remove the
91