Lenovo S500z Hardware Maintenance Manual page 96

3. Remove the screw that secures the frame stand. Then, lift the frame stand to remove it from the
computer cover.
Figure 17. Removing the frame stand
4. Insert the two tabs
pivot the frame stand downward and tighten the screw to secure the stand to the computer cover.
Figure 18. Installing the frame stand
Replacing the monitor stand
To replace the monitor stand, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
90
Lenovo S500z Hardware Maintenance Manual
1 on the new frame stand into the corresponding holes in the computer cover. Then,