Technical Data - Graco PRO 5500wb Instructions-Parts List Manual

Category
Maximum Working
Pressure
Air Pressure Operating
Range
Fluid Pressure Operating
Range
Voltage Output
Short Circuit Current
Output
Turbine Air Inlet
Fluid Inlet
Weight (gun and
manifold)
Part No. 237603
Part No. 238091
Fluid Specification
Manual Change Summary
This manual has been changed per ECO's V5645, V481, and V389203.
58 308496

Technical Data

Data
100 psi (0.7 MPa, 7 bar)
0–100 psi (0–0.7 MPa,
0–7 bar)
0–100 psi (0–0.7 MPa,
0–7 bar)
0–60 kV*
120 mA
1/4 npsm(m), left-hand
custom inlet for Graco
waterborne fluid hose
3.6 lb (1620 g)
4.0 lb (1818 g)
For use with fluids that
meet at least one of the
following conditions for
non-flammability:
D The fluid has a flash
point above 140_F
(60_C) and a maxi-
mum organic solvent
concentration of 20%,
by weight, per ASTM
Standard D93.
D The fluid does not
sustain burning when
tested per ASTM
Standard D4206 Sus-
tained Burn Test.
Category
Maximum Fluid
Temperature
Wetted Parts
Maximum Noise Level
with atomization air at
100 psi (0.7 MPa, 7 bar)
and maximum air flow
Sound Pressure {
Sound Power }
{ Sound pressure was measured per Cagi Pneurop, 1969.
The measurement was taken 3.28 feet (1 meter) from the
air cap.
} Sound power was measured per ISO–3744, 1981.
* Do not exceed 60 kV. Operating the gun above 60 kV will
void the Graco warranty. The gun's normal high voltage
reading is 45 to 55 kV due to spraying current demands
and isolation system losses.
rVitonr, and Kalrezrare registered trademarks of the
DuPont Co.
Loctiter is a registered trademark of the Loctite Corporation.
r
Chemraz is a registered trademark of the Green, Tweed, &
Company.
Data
120_F (49_C)
Stainless Steel, Nylon,
Acetal, PTFE,rKalrezr,
Ceramic, Chemrazr,
Fluoro-polymer
101.5 Db(A)
107.0 Db(A)