Graco PRO 5500wb Instructions-Parts List Manual page 57

Electrically Conductive Air Hoses
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
For connection between the air supply and the spray
gun; conductive, stainless steel, wire braid for ground-
ing; polyurethane tube and cover; 0.315 in. I.D.; 1/4
npsm(f) x 1/4 npsm(f) left-hand thread; the hose is
color-coded red
Hose Part No.
235068 6 ft. (1.8 m)
235069 15 ft. (4.6 m)
235070 25 ft. (7.6 m)
235071 36 ft. (11.0 m)
235072 50 ft. (15.2 m)
235073 75 ft. (23.0 m)
235074 100 ft. (30. 5 m)
Accessories
Use Only Genuine Graco Parts and Accessories
Hose Length
Fluid Regulator Conversion Kit 238147
To add a fluid regulator to the part no. 237603 and
236824 PRO 5500wb spray guns. See page 47 for kit
installation instructions.
Gun High Voltage Probe & Meter 217452
For direct measurement of the gun output voltage.
Megohmmeter 241079
500 Volt output; 0.01–2000 megohms.
Not for use in Hazardous areas.
Grounding Rod 210084
For use in the Fluid Voltage Discharge and Ground-
ing Procedure.
TI0377
308496 57