Firmware Update; Procedure - Siemens SICAM RTU User Manual

Service
5.5

Firmware Update

In SICAM AK 3, new system elements or new revisions of system elements can be integrated,
if required.
For each system element an individual loadable firmware is provided. You find information
thereto in section 3.5,
5.5.1

Procedure

The updating of a system takes place in the following steps:
1. Download firmware code(s) and Toolbox update(s) from internet under
www.siemens.com/sicam
2. Import firmware code(s) and Toolbox update(s) into the SICAM TOOLBOX II
3. Load firmware(s) into the target system
Procedure for the Update of System Elements
interrogate firm-
ware revision
new firmware
available
import master
data
update target
system
The SICAM TOOLBOX II contains after its installation all current firmware revisions (based on
the date of issue of the installed version).
230
Loadable Firmwares.
selection AU
revision
interrogation
Save firmware file on
TOOLBOX PC
select firmware file to
be imported
master data
update
selection AU
load
firmware
open
start import
load
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03