4.2.2
Documentation
4.2.2.1
Cross Reference List
With the tool "CAEx plus" a cross reference list over the project hierarchy can be generated,
displayed on the screen, or printed.
The cross reference list extends alternatively over a
·
Basic system element
·
Program organization unit
It is executed via the respective context menu Cross-references .
You find the instruction thereto in the CAEx plus Online Help, chapter "Basics", section "De-
fault Operating Elements", section "Commands of the Pop-Up Menus".
4.2.2.2
Open/Closed-Loop Control Function
In the project hierarchy of the tool "CAEx plus", by selecting each level the function Print can
be executed, by means of pop-up menu. The print operation is started on the default printer of
the PC.
You find the instruction thereto in the CAEx plus Online Help, chapter "Basics", section "De-
fault Operating Elements", section "Commands of the Pop-Up Menus", section "Print in Pro-
ject Management".
Additional information can be found in the CAEx plus Online Help, chapter "Basics", section
"Default Properties" as well as chapter "Lists and References", section "Designing Printouts
with DXF".
Further extensive possibilities for the documentation are provided by the optional function
Document Management (additional product for CAEx plus).
You find the details thereto in the CAEx plus Online Help, chapter "Additional Products", sec-
tion "Documents Management (Optional)".
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
Engineering via SICAM TOOLBOX II
203