Telecontrol - Siemens SICAM RTU User Manual

Engineering via SICAM TOOLBOX II
4.1

Telecontrol

The acquisition parameter setting and documentation of the process-technical process and its
associated data points is enabled in the SICAM TOOLBOX II mainly with the help of the tool
"OPM II" (Object Orientated Process Data Manager).
Overview of the Tasks
Task
Presets
Initialization of the plant data
Import firmware
HW configuration
Parameterization of the sys-
tem technique
Parameterization of the pro-
cess technique
Bulk edit
Transfer parameters
SD Card
Import/Export
Documentation
Load Parameters
Parameter comparison
Data flow test
Message simulation
Service function online
ST emulation
Topology test
Diagnosis
182
Meaning
Define user and rights; language
Configure plant and automation unit
Load firmware into the SICAM TOOLBOX II
Select installed system elements
· Time management
· Communication common
· Protocol Elements
· Redundancy
· Representation of data points assigned to hardware I/Os
· Decentral archive
· Create images
· Assign process images to data points
· Settings for configured process signals
· Routing of send data and receive data
Edit great amounts of image parameters
Translate parameters for the target system
Write and read application data
Generate and read backups of the application data
Formatted spreadsheets for printing
· Hardware (configuration, pin assignment)
· Parameter
Transfer parameters and function diagram to the target sys-
tem
Compare settings between current project and target system
Record and store dataflow in the target system
Send messages from the SICAM TOOLBOX II to a target
system
Read and set time of target system
Execute system-internal functions (only for authorized users)
Acquisition of physically connected automation units in a
SICAM RTUs automation network
Read detailed information generated by the self monitoring
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03