Sicam Ak 3 As Telecontrol Substation With Integrated Switch For Sicam Toolbox Ii Connection - Siemens SICAM RTU User Manual

6.2.5 SICAM AK 3 as Telecontrol Substation with integrated Switch for
SICAM TOOLBOX II connection
·
Communication with the control system via IEC 60870-104
(Ethernet-Interface, X0 or X1, can be set with parameter)
·
Communication with SICAM TOOLBOX II via http/https
(Ethernet-Interface, X0 or X1, can be set with parameter)
·
SICAM AK 3 is used as switch between control system and SICAM TOOLBOX II
·
By means of SICAM TOOLBOX II, which is connected via the integrated switch, it is pos-
sible to reach the local SICAM AK 3 and further SICAM RTUs components via the „Control
Center Zone". It depends on the network configuration which can be reached.
Features of the Ethernet Ports:
·
1 IP address
·
1 subnet mask
·
1 default router
·
Parameter
─ 1 IP address (connected ports in switch mode)
Office Zone
Control Center Zone
Substation Zone
SICAM AK 3
S I C A M A K
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
Network settings | IP address | Mode of Ethernet ports
S I C A M A K
SICAM
TOOLBOX II
Automation Units and Automation Networks
Control Center
IP-address:
Subnet mask: 255.255.0.0
Router
IP-address: 172.16.0.254
CP-2016 or CP-2019
PRE0 / ET24
IP-address: 172.16.0.3
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
X0
X1
X2
X3
IP-address: 172.16.0.4
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
172.17.0.22
249