Application/Configuration Of The Local Ethernet Interfaces - Siemens SICAM RTU User Manual

Automation Units and Automation Networks
6.2 Application/Configuration of the local Ethernet Interfac-
es
MAC addresses of the Ethernet Interfaces
The local ethernet interfaces X0 and X1 of CP-2016 and CP-2019 have, depending on the
version of the module, either 1 or 2 MAC addresses.
Description
CP-2016
CP-2019
CP-2016
CP-2019
You can find the MAC addresses, form module version CC upwards, on a separate label on
plug X99.
If parameter
value 1 IP address (connected ports in switch
used on both local ethernet interfaces.
If parameter
value 2 IP addresses (independent
244
Item number
from BC2-016-A
from BC2-019-A
BC2-016-
BC2-019-
Network settings | IP addresses | Mode of Ethernet ports
Network settings | IP addresses | Mode of Ethernet ports
ports), then both MAC addresses are used.
MLFB
from 6MF10130CA160AA0CC
from 6MF10132CA100AA0CC
6MF10130CA160AA0BB
6MF10132CA100AA0BB
mode), then the first MAC address (X0) is
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
MAC addresses
2
2
1
1
is set to
is set to