Table of Contents
Advertisement
C9. alignment
C10. char rot
C11. field rot
C12. "fixed char" Fixed characters to appear in the field. Maximum 2710
C13. sym set
Example
Defines a constant text field starting at row 30, column 10. It
does not have any additional inter-character gap. The Standard
font is used without any additional magnification. The printing is
black on white and left justified. No field or character rotation is
used. "MADE IN USA" is printed in this field. The internal symbol
set is used.
4-16 Defining Fields
Alignment of constant text in the field. Options:
L
Align on left side of field.
B
Align at midpoint of field
E
Align at end of field.
Character rotation. Options:
0
Top of character points to top of field
1
Top of character points to left of field
2
Top of character points to bottom of field
3
Top of character points to right of field
Field rotation. Lower left corner of field is the pivot point.
Options:
0
Top of overlay points to top of supply
1
Top of overlay points to left of supply
2
Top of overlay points to bottom of supply
3
Top of overlay points to right of supply
NOTE: Rotation is affected by the pivot point, which varies
depending on how text is justified.
characters. Enclose in quotation marks.
Symbol set. Options:
0
Internal Symbol Set
1
ANSI Symbol Set
437
DOS Code Page 437 (Domestic)
850
DOS Code Page 850 (Multilingual)
NOTE: The CG Triumvirate fonts support only the ANSI and
DOS Code Page Symbol Sets. See Appendix C,
"Symbol Sets/ Code Pages," for more information.
C,30,10,0,1,1,1,B,L,0,0,"MADE IN USA",0
Advertisement
Table of Contents
