Assembling The Front Wheel; Adjusting The Front Wheel Static Balance - Yamaha XT250X Service Manual

1
c. Remove the wheel bearings with a general
bearing puller.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS21960

ASSEMBLING THE FRONT WHEEL

1. Install:
Wheel bearings
G
Oil seals
New
G
Spacer
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
EC3C51001
CAUTION:
Do not contact the wheel bearing inner race
"1"or balls "2". Support with the outer race
"3".
NOTE:
Use a socket "4" that matches the diameter of
the wheel bearing outer race and oil seal.
2
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
After replacing the tire, wheel or both, the front
G
wheel static balance should be adjusted.
Adjust the front wheel static balance with the
G
brake disc installed.
1. Remove:
Balancing weight(s)
G
2. Find:
Front wheel's heavy spot
G
NOTE:
Place the front wheel on a suitable balancing
stand.
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Spin the front wheel.
b. When the front wheel stops, put an "X
at the bottom of the wheel.
c. Turn the front wheel 90° so that the "X
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
4-5
FRONT WHEEL
4
3
2
1
" mark
1
" mark
1
" mark at
2